Utp Bnc One
MX CCTV Passive Video BNC Balun over UTP (4 * BNC)
|
|
Twisted One Pair Passive Video Balun CCTV Network UTP BNC $13.49 Featrues:Twisted One Pair Passive Video Balun CCTV Network UTP BNC.Passive Video Balun: Using UTP cable to transmit video audio signal instead of co-axial.Longer transmission distance, >600meter.Lower budget, the price of UTP is much less than co-axial cable.Easy Installation, using the standard UTP cable system.Twisted CCTV Network Balun supports all video device, such as camera, monitor, DVR card, recorder, etc.UTP BNC Balun is compatible with local Area Network system, using pin 4,5 for video signal and Pin 7,8 for power transmission.Specification:Maximum Output: 1.1Vp-pLoss Ratio: >2dbRejection Ratio: <15dbInterference: >40dbTransmission Distance Color: <600meterTransmission Distance B/W: >750meter BNC Resistance: 75ohm UTP Resistance: 100ohmTemperature: 0~55CSize of each balun: 5.5 x 2.5 x 2cm Approx.Lenth of each power convert cable: 12.3cm long. Approx.Color: Black and Silvery.Weight: 85gPackage Contents:Pair BNC Video BalunPower Covert Cable x 2 |
|
|
4 Channel Video BNC to UTP RJ45 Balun CCTV Camera DVR $22.49 Description:This BNC to UTP RJ45 Balun transmits video signal via UTP Lan cable.Input: BNC-videoOutput 1 of 4ch box – One RJ45, each for 4 channels (Pin 1-2 ch1, Pin 4-5 ch2, pin 3-6 ch3, pin 7-8 ch4).Output 2 of 4ch box – Four screw output for 4 channels.Passive design (no power required).This Video BNC UTP RJ45 Balun using standard LAN cable, patching.This 4 Channel BNC UTP RJ45 Balun does not support 12V power transmission.Maximum 300m color video working distance (much better than coaxial cable 100m).Casing Material: MetalDimension: ~9.5(L) x 7.8(W) x 2.8(H)cmWeight: 257gPackage Included:1 x 4 Channel Video BNC to UTP RJ45 Balun |
|
|
One Pair Passive Video Balun CCTV Network UTP BNC $13.49 Featrues:Using UTP cable to transmit video audio signal instead of co-axial.Longer transmission distance, >600meter.Lower budget, the price of UTP is much less than co-axial cable.Easy Installation, using the standard UTP cable system.Video Balun support all video device, such as camera, monitor, DVR card, recorder, etc.Passive Video Balun is compatible with local Area Network system, using pin 4,5 for video signal and Pin 7,8 for power transmission.Specification:Maximum Output: 1.1Vp-pLoss Ratio: >2dbRejection Ratio: <15dbInterference: >40dbTransmission Distance Color: <600meterTransmission Distance B/W: >750meter BNC Resistance: 75ohm UTP Resistance: 100ohmTemperature: 0~55CSize of each CCTV Network Video Balun:11.8cm long, 2.7cm wide ( at the widest ), 2cm thick ( at the thickest ). Approx.Lenth of each power convert cable: 16cm long. Approx.Color:Black and Silvery.Weight:85g.Package Contents:One Pair UTP BNC Video BalunPower Covert Cable x2 |
|
|
4 Channel Video ( BNC ) to UTP ( RJ45 ) Video Balun $16.49 Description:The UPT Video Balun supports 4 video channel ( BNC ).One UTP Cable to carry 4 Video Signal or 4x UTP to carry 4 Video Signal with Camera Power.Adopt different signal transmission with excellent anti-jamming ability. Passive Device ( no power required ).600 Meter working distance.Power input of the Video to UPT Balun is for 4 Camera -UTP.The 4 Channel Video Balun supports CCTV Camera, DVD Video, Projector, TV Video Signal.Size of the Video Balun: 17.4cm long.Approx.Weight:141g.Package included:1x 4Channel Video to UTP Balun 2x Screws1x User Manual |
|
|
2 PCS CCTV Camera BNC Balun Video Coax UTP Transceiver $9.49 Description:This Video Transceiver is capable of receiving and transmitting video signals over UTP wire without using the power supply.Enables cost-effective, point to point transmission appliance. BNC Balun adopts twisted pair wiring, proving low cost and easily obtainable.Provides noise interference restrain design and permitting stable images.The max receiving and transmitting distance is 60OM.Built-in transient protection design, UTP Transceiver needless to use a ground connection.Specification:Power In: Not RequiredVideo IN/OUT: BNC (Male)Transmission Distance: Max. 600M(BW)Video Format: NTSC / PAL / CCIR / SEC AMOperation Frequency Range: DC – 10MHzTwisted Pair Connector: One Pin ConnectorCommon Mode Rejection: 70dbInput Impedance: 75 ohmsOutput Impedance: 100 ohmsWire Type: UTP Category 3, 4, 5, 5e or 6; UTP 2-24AWG or better.Overall Length (Each One): ~20cmTotal Weight: 72gEnvironmental:Operation Temperature: -40degreeC – +85degreeCHumidity: 0 ~ 98% (non-condensing)Package Included:2 x CCTV Camera Video Balun |
|
|
BNC Balun Video Coax UTP Transceiver Kit for CCTV Camera $7.49 Features:The CCTV Camera Video Balun is capable of receiving and transmitting video signals over UTP wire without using the power supply.Enables cost-effective, point to point transmission appliance. Adopts twisted pair wiring, provding low cost and easily obtainable.Balun UTP Transceiver provides noise interference restrain design and permitting stable images.The max receiving and transmitting distance is 60OM.Built-in transient protection design, needless to use a ground connection.Specifications:Video in/out: BNC (Male)Transmission distance: Max. 60M (BW)Video format: NTSC / PAL / CCIR / SEC AMOperating frequency range: DC-10MHzTwisted pair connector: one pin connectorCommon mode rejection: 70dbInput impedance: 75 ohmsOutput impedance: 100 ohmsWire type: UTP category 3, 4, 5, 5e or UTP 2-24AWG or betterSize: 5.1 x 2.4 x 2.1cmCable length: 10cmWeight: 35gPackage content:1 x BNC Balun Transceiver1 x English Manual |
|
|
4 Channels Passive Video BNC UTP Balun Transceiver $12.99 - Features 4 BNC male to 1 RJ45 or 8 Pin terminal block – Transmit video signal via UTP Lan cable – Passive, no power required – Maximum 300m color video working distance (much better than coaxial cable 100m) – Built in impedance couple device and noise filter for exceptional interference immunity – Can be used as a receiver and as transmitter – High quality video balun, full motion color video or black and white – Fast and easy installation – Videobaluns enable you to reduce material and installation costs – Output 1: One RJ45, each for 4 channels (pin 1-2 ch1, pin 4-5 ch2, pin 3-6 ch3, pin 7-8 ch4) – Output 2: Four pairs of screw output for 4 channels |
|
|
Utp Box Cam With 1/3 600 Lines E-Day/Night Built-In Utp/Bnc $143.99 UTP BOX CAM WITH 1/3 600 LINES E-DAY/NIGHT BUILT-IN UTP/BNC |
|
|
8 Channel Video BNC to UTP RJ45 Balun CCTV Camera DVR $38.49 Description:This BNC to UTP RJ45 Balun transmits video signal via UTP Lan cable.Input: BNC-videoOutput 1 of 8ch box – Two RJ45, each for 4 channels (Pin 1-2 ch1, Pin 4-5 ch2, pin 3-6 ch3, pin 7-8 ch4).Output 2 of 8ch box – Eight screw output for 8 channelsPassive design (no power required).This Video BNC UTP RJ45 Balun using standard LAN cable, patching.This 8 Channel BNC UTP RJ45 Balun does not support 12V power transmission.Maximum 300m color video working distance (much better than coaxial cable 100m).Casing Material: MetalDimension: ~19(L) x 7.9(W) x 2.8(H)cmWeight: 497gPackage Included:1 x 8 Channel Video BNC to UTP RJ45 Balun |
|
|
1 Channel Passive Video BNC Balun Transceiver $10.49 Description:Video Balun Transceiver supports receiving and transmitting video signals over UTP wire without using the power supply.Video BNC Balun Kit provides noise interference restrain design and permitting stable images.1 Channel Video Balun support all video device, such as camera, monitor, DVR card and recorder etc.Specification: Male BNC connector on one end.The Max receiving and transmitting distance is approx. 500M.Total Length (Each One): ~22.8cm (~8.97")Total Weight: 72gPackage content:1 x Transmitter1 x Receiver |
|
|
2 CCTV Passive Video Balun UTP BNC Cat5 Transceiver $9.49 Description:Single channel passive Video Balun.Full-motion CCTV video at distances up to 600m when used with any passive transceiver.Video transmission via UTP CAT5 cable.Receiving and transmitting video signals over UTP cable without using the power supply.Up to 3,000 ft ( 1km ) with any active UTP video receiver.The CCTV Passive Video Balun supports all video device, such as camera, monitor, DVR card and recorder etc.No power required.The Video Transceiver is easy to install, using the standard UTP cable system.Connectors: Male BNC and terminal blocks.Size of each CCTV BNC Video Balun: L4.5xW1.4xh1.5cm.Approx.Color: Gray. Weight: 37g. Package Contents:2 x CCTV BNC Video Balun Transceiver |
|
|
4 Channel Camera CCTV BNC Video Balun Transceiver Cable $10.98 - Adopt differential signal transmission with excellent anti-jamming ability – Save project wire expense,each a pair of twisted pair wire transmits one channel of video signal and one common cat-5 unshield twisted pair wire can simultaneously transmit four channels of video signal – Full motion CCTV cideo at distances up to 330M when used with any passive UTP video transceiver – Up to 1500M with any active UTP video receiver – No power requied – Built-in transient suppression protection – Frequency response: DC-8MHz – CMRR(Common Mode Rejection Ratio): 60DB – Impedance: BNC: 75ohm;RJ45: 100 ohm – Applicable to NTSC,PAL,SECAM and CCIR systems – Package included 1 x 4 Channel Camera CCTV BNC Video Balun Transceiver Cable 1 x English user manual 2 x screws ? |
|
|
Utp Video Balun $21.99 Send video up to 1000′ via CAT5 or similar UTP cable Connects directly to a twisted wire pair via screw terminals Connects to video source or destination with BNC connector Noiseless 70dB common mode rejection rating Includes BNC to RCA male adapter and 7″ BNC extension cable |
|
|
RJ45 Video Balun Transceivers – BNC Video/Power over RJ45 UTP Cable (2-Piece Set) $7.9 RJ45 Video Balun Transceivers – BNC Video/Power over RJ45 UTP CableCCTV via twisted pairImpedance: Coax75ohmsUTP, RJ45 100 ohmsSize: 150*100*25 mm |
|
|
4 Channel Camera CCTV BNC Video Balun Transceiver(No Cable) $13.12 - Adopt differential signal transmission with excellent anti-jamming ability – Save project wire expense,each a pair of twisted pair wire transmits one channel of video signal and one common cat-5 unshield twisted pair wire can simultaneously transmit four channels of video signal – Full motion CCTV cideo at distances up to 330M when used with any passive UTP video transceiver – Up to 1500M with any active UTP video receiver – No power requied – Built-in transient suppression protection – Frequency response: DC-8MHz – CMRR(Common Mode Rejection Ratio): 60DB – Impedance: BNC: 75ohm;RJ45: 100 ohm – Applicable to NTSC,PAL,SECAM and CCIR systems – Pakcage included 1 x balun 1 x English user manual ? |
|
|
StarTech.com RCA to BNC Adapter $7.99 1 x BNC Female Video 1 x RCA Male Video This one-piece RCA to BNC converter features an RCA (male) connector as well as a BNC female connector, letting you convert a female RCA connector into a female BNC connector. The adapter comes with a notched grip for easy connection or disconnection and is backed by our lifetime warranty. Lifetime RCA to BNC Adapter – M/F RCABNCMF RoHS StarTech.com Video Adapter Yes www.startech.com |
|
|
UTP 4 Channel Passive Video Balun Transceiver $24.49 Description:With working with passive transceiver and active transmitters allow signals transmission up to 330m and 1500m respectively.The unparalleled interference rejection and low emissions of the UTP allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits.This 4 Channel Video Balun allows the use of a shared or existing cable plant.Video balun is to convert the video signal into the balanced signal applicable to be transmitted on common Cat-5 unshielded twisted pair wire with perfect transmission effect, which can be applied in the occasions such as video monitoring and video meeting and can transmit four channels of video image simultaneously on an 8-core Cat-5 twisted pair wireVideo Balun Transceiver can simplify the wiring project and save wire use quantity.Specifications:4 Channel UTP Balun adopt differential signal transmission with excellent anti-jamming abilitySave project wire expenses. each a pair of twisted pair wire transmits one channel of video signal and one common Cat-5 unshielded twisted pair wire can simultaneously transmit four channels of video signalFull motion CCTV video at distances up to 330m when used with any passive UTP video transceiverUp to 1500m with any active UTP video receiverNo power requiredBuilt-in transient suppression protectionSpecifications:Frequency response: DC – 8MHzCMRR (Common Mode Rejection Ratio): 60DBImpedance: BNC terminal: 75ohm, Connection terminal: 100ohmWorking temperature: -10degreeC – 70degreeCStorage temperature: -30degreeC – 70degreeCApplicable to NTSC, PAL, SECAM and CCIR systemsSize: 10.3 x 5.7 x 2.8cmWeight: 184gPackage content:1 x UTP Passive Balun1 x Manual |
|
|
1 Channel Active CCTV UTP Video Transmitter with Receiver $28.49 Description:The kit containing a single channel transmitter and a single channel receiver.Three position range switch for gain select on transmitter.Four position distance range switch on receiver.CCTV Video Transmitter Receiver with built-in transient protection and ground lifting.The farthest transmission distance will be 1500m if it is used with passive transceiver, and the fasthest transmission distance can reach 2400m if it is used with active transmitter.Active UTP Video Transmitter Receiver with built-in transient suppression protection.Technical Specification:Frequency Response: DC-8MHzCMRR (Common Mode Rejection Ratio): 60dBImpedance: BNC terminal : 75Omega, connection terminal: 100OmegaWorking Temperature: -10degreeC – 70degreeCStorage Temperature: -30degreeC – 70degreeCApplicable to NTSC, PAL, SECAM and CCIR systemsPower Supply: DC 12V (Max:50mA)Casing Material: PlasticDimension (Each One): ~7.4(L) x 4.6(W) x 2.5(H)cmWeight: 165gPackage Included:1 x UTP Video Transmitter with 2 Screws1 x UTP Video Receiver with 2 Screws |
|
|
SW271S91 300ft BNC to BNC Extention Cable $79.99 The Swann SW271-S91 is a 300′ BNC male to BNC male video cable with an integrated DC power cable. This cable is designed to for use with Swann cameras and DVRs equipped with BNC video connectors. By combining video and power into one cable, a single cable run can be used to supply both video and power to the camera, greatly simplifying the camera and DVR installation process. |
October 9th, 2009 in
Uncategorized